When I'm interested in any RC model, I visit your channel and look here first. You cover the technical details so well and you communicate just as well how the model "feels" regarding both flying and the allover quality impression of it.👍👍👍
My father few these machines for the Canadian Coast Guard for many years. Phenomenal performance, but make many folks airsick due the semi-ridged rotor system that gives it a stiff ride like a Lamborghini/supercar.
@@junebugrc3015 Thank you so much for your trust and support. I will always do my best to bring honest and straight forward reviews, even if manufacturers hate me and put a bounty on my head LOL
I agree. I have a little syma s100 with auto take off and land. It a few times has went full throttle into the ceiling and cutting the throttle did nothing. Auto take off land is not good for experienced flyers.
Just ordered mine from Banggood now I have 8 helicopters 🚁 all together. I love the eachine line up of helis awesome helis my next buy is the black hawk heli 👍👍👍👍👍
That's the same chopper as seen in the James Bond film "A View To A Kill" opening sequence (but painted orange and white) A large radio-controlled model was also built of it for its inevitable explosive crash. I just bought one of these from Banggood. I hope it arrives OK. Gonna re-paint it to match the one in the film ;-)
Thankyou - I enjoyed this video. I own this rc helicopter and it is very beginner friendly. There are issues that come from that beginner friendly situation. The throttle response is quite poor once the helicopter is at hover altitude - meaning pulling the stick back to the maximum position leads to a very gentle descent. At setting 3 out of 3 for responsiveness, the bank angle is limited too. This sadly limits the capability of an otherwise excellent package for the price. Perhaps someone will produce a CP conversion kit, or a 'pro' model will be launched.
I actually just ordered this same RC helicopter. So cool how fast this thing flies. The Messerschmitt Bolkoe Blohm (MBB BO-105) is powered by 2 Allison Model 250-C20B engines rated at 420 horsepower, Same engine as the Bell 206B Jetranger.
I have 2 of them the first fry up the esc and keeping for parts the second one i use to fly early in the mornings with low or no wind its lot of fun and durable if the main motor will be Brusheless and there be switch to manual control this think it will be epic
I love that chopper, 4 blades, very scale, color, and easy to fly. Thank you for making and posting this video. (You're a very skilled pilot). ¿What is the more conventional position of the throttle control lever, please? (¿Right or left?). Thank you.
Just received my Eachine E120 RTF, read the directions,charged the batteries,installed the batteries in the transmitter,bound and lift off in my living room "Which is quite large",hoovered perfect no trim needed,only complaint is the slow stick input,you have to move the sticks quite a ways before the E120 reacts.Over all it's ok 👍👍👍,could you do a short video on how to set up the E120 to fly with my Radiomaster TX16s or Radiomaster Zorro open TX ? would be much appreciated
The Optical Flow is a function of the remote control, the helicopter uses the barometer. Mr. Amewi explanes in his video how it works at about 4.30 min. Its German, but bodylanguage speaks for itself. The video: Amewi AFX-105 Single Rotor Scale Helikopter Unboxing & Erklärung have fun!
Fly it like you stole it! ;D Sounds good.^^ Cheers from Berlin, Germany my friend and I gotta say they did not skimp out on the German name, it's even hard to say or remember as one.
I was under the impression that altitude hold was all it had, not position hold? My neighbor just got one from my advice, even though I'd never flown one yet. He's a super newbie, and although I've been in the hobby for over 30 years, I never really got good at helis, even though I have a bunch of them! lol
I really like your videos and the way you present them. I checked out a video on learning to fly a CP helicopter and worried about the second step nose in hovering. Nose in is the most difficult thing to do with a CP heli without stability if you have it. In my country the Uk we have a basic helicopter achievement scheme that requires the tail in hover then the hovering T leading to the figure 8. I fear a newcomer would soon crash nose in without a training aid. I learned to fly with a flybared heli maybe the flybarless helicopters are more stable.
these are more stable and with altitude hold, position hold features, makes it easier to learn orientations. however throttle control that is one of the most important skill, you can't learn that with such features
@@alishanmao I only issue a have is nose in hovering this in my opinion should be done when you are very confident and can fly a figure 8. I would certainly recommend a training aid to start with definitely if your helicopter doesn't have all the stability aids. Keep up those videos i love the way you present them.
I jus got this sweet copter and man I gotta tell ya it’s soooo easy yo fly I’m actually learning to do figure 8’s something I cannot do with my other cooters cuz m not a good pilot yet but with copter I’ll learn!!
I can't find optical flow in the specs of this helicopter anywhere, are you sure it exists? Same as the pro version that does exist, but never mentioned in a RUclips video. the difference is in the remote; is has other sticks maybe better performance in the yaw?
Good review as usual. What's to think against E130 (I own it and it is really funny for the price)? It seems to have the same aptitudes with a scale modeling for E120 (cockpit, fairing, frame, 4 blades, ...), isn't it? E110 seems also interesting for the price but camera is quite deceptive. E200 ... I am septical for the price, but I still wait my FW200... I was and I am still so satisfied with FW450, even in V1 version.
@@alishanmao Excactly what I thought. I'll keep my E130 as it is not a bad chopper for the price, ideal for beginners and intermediates. But for best practice FW450 (mine is still V1) and future FW200 are more expensive but much sure to pilot and for extend flying time with extra/better batteries, it worth the money of course even if it is not so cheaper! Thank you very much for your quick answer! I wikk wait for FW200 so much... For FPV if necessary (not in my case as I own several Fimi and DJI products like FPV and Mavic Cine), a small FPV cam like Eachine is sufficient, I have a Eachine TX02 (TX01 and DTC03 existt also) and for the price if you have a standard mask, it will make the job, rvrn on a car. Don't want to speak about my other products as Fimi X8 mini (a bomb for the price), DJi FPV so specific and my absoltely best DJI Mavic 3 Cine, it is not the subject, (but fliy so well) or splendid WW2 Eachine WWII warbtirds, they are amesome for the cost. + Traxxas cars fot my children, ... You see I try to test a lot of ptroducts, not one or twoand that it..RC pilot a day, RC pilot forever -) Thanks and see you again Daniel
The lack of a spool up, I find scary. Prob. no brushless main for its price but its moving ok , will have to get used to it & most likely join the Fleet of scale XK's. Good peeks, amigo. TY 👍
It is cool. But you can save about $40;if you buy the rc era version called e168. Its the exact same heli my just different decals. I bought the 4c era version too
No prob. I noticed though. The performance,speed and control is much better on the eachine one though. The RC era one is much slower as well and harder to control in the wind.
Ordered from Aliexpress mid april. Last ship update mid may. Tried to open dispute and they say you can't do that until 7/10 2022. 3 months before you have any recourse even if it was never delivered? Won't be ordering there again.
Tell me after that which helli its appropriate? i purchase xk 123 and i was hard time i sell it its fragile and very difficult. I want one heli to learn to stand in winds and durable Brushless and collective i dont want to learn 3d
Get his one: tiny.cc/nakruz or this one tiny.cc/g8anuz fly it scale and be happy. 2nd one has GPS so you will have more fun with it and if you want to do 3D, it has auto 3D features, you do not need to learn anything
I know this was a year ago, but the new Description says nothing about Optical Flow. Interesting says No Ailerons. Product Description: 1, No ailerons, 4 channels, automatic stabilization system, more stable than the previos version.
@@alishanmao ok, Lost in the Translation! 😂 The Pro one Heli Direct lists must be a Knockoff. No flow control. I ordered one from Banggood direct. Shipped today.
gyro calibration is for when your helicopter drifts to one side and even trimming does not help. its not for position hold my friend. position hold is done with optical flow sensor which is not programmed right.
Can it be bounded to e6 transmitter, which they sell with E200 Blackhawk? I started to learn flying better and I don’t like the stock transmitter anymore…
My e120 will be flying fine or hovering. Then all the sudden the props stop and it drops out of the sky. I've tried making sure the prop mechanisms are fine and batteries are full charge. What do you think could be causing it? Can you help with some advise please? I've only had it a couple weeks. It was working real good . This just started happening.
Ali, I have just discovered RC Helicopters due to a friend showing me his beginner copter he flys indoors, and based upon your reviews. I ordered an E120 which should arrive tomorrow. The manual doesn't make any sense with regard to recalibrating the gyro. What is the exact process for doing that? Thanks!
The guy who makes and OEM for Eachine like E180, E150, E200 UH-60 blackhawk, his brother started this company and making these helis so they are doing OEM for others as well. seems like they are making truck loads of money by selling these BO105 and Sentry E110 :D
My eachine 120 has a pronounced lean to the right during hover and I noticed until Ben is bent a little to the left with the rear motor could this be the problem ? Thanks Henry
@@alishanmao These things are available in a whole raft of re-brands of the OEM Yu Xiang BO105. Pascal has the Protocol decoded now. (E129/C186) You will need Multi Firmware Version v1.3.3.13 and better. That suits the XK K127 as well.
Nice Heli but need a more lighter colour like Orange german (Katastrophenschutz) or Yellow (ADAC) German automobile club.Heli is nice for watching how it fly scale and nice to make videos where it flys.This Heli was selled under 6 different brands. Eachine,Amewi,FM, and on
@@alishanmao I buy under FM brand in White Red, nice colour .First Mini Heli i own that can withstand a windy day . Under the front underside there is a hole (under the sticker) to build in a Led for night flying.
the performance of that helicopter, flight times and its power to do 3D, its worth it. besides the scaled shell is also very detailed. i know price is high and its due to covid19 that has screwed the businesses and supply chains and everything is getting more and more expensive.
never touched EdgeTx. I am still happy with my old RadioMaster TX16S with opentx. same reason. I do not like new things and new surprises. If something is working for me right, i stay with it until i have no way to stay with it and I have to move. Check with edgetx groups online please. thank you
The Blade Red Bull B-105 is still better cause it didnt have that stupid direct drive tail motor.. I feel thats cutting corners. this heli needs a drive shafts for tail rotor rotation.. Like the real thing!!
Hi Ali! Thanks very much indeed for the awesome review of this heli. I could realize there is a RC era C186 wich seems quite similar to the e120. Are they made by different manufacturers or they are like the e200 and f09 U-60 which are both made by YUXIANG?
you can do the gyro calibration buddy. turn on radio and helicopter, throttle up and down. now do not take off but pull both sticks down and left and hold for 2 seconds. heli lights will blink and once stop blinking. you can take off, and it will hold solid hover
When I'm interested in any RC model, I visit your channel and look here first.
You cover the technical details so well and you communicate just as well how the model "feels" regarding both flying and the allover quality impression of it.👍👍👍
Thank you very much!
My father few these machines for the Canadian Coast Guard for many years. Phenomenal performance, but make many folks airsick due the semi-ridged rotor system that gives it a stiff ride like a Lamborghini/supercar.
wow, flying a real one. Awesome
I like the scale look but I really wish it had an option for manual throttle. I guess it's good for beginners to learn orientation 👍
thats what I emphasized in this video too
@@alishanmao your honesty has always guided me to buy the right RC that fits my preference. Thankyou friend
@@junebugrc3015 Thank you so much for your trust and support. I will always do my best to bring honest and straight forward reviews, even if manufacturers hate me and put a bounty on my head LOL
I agree. I have a little syma s100 with auto take off and land. It a few times has went full throttle into the ceiling and cutting the throttle did nothing. Auto take off land is not good for experienced flyers.
Just ordered mine from Banggood now I have 8 helicopters 🚁 all together. I love the eachine line up of helis awesome helis my next buy is the black hawk heli 👍👍👍👍👍
Salut moi aussi je veux comment faire et ça coûte combien 🤝
It is lots of fun. My 12 year old daughter learned on it. Its very forgiving
awesome have fun
That's the same chopper as seen in the James Bond film "A View To A Kill" opening sequence (but painted orange and white) A large radio-controlled model was also built of it for its inevitable explosive crash. I just bought one of these from Banggood. I hope it arrives OK. Gonna re-paint it to match the one in the film ;-)
have fun buddy
Thankyou - I enjoyed this video. I own this rc helicopter and it is very beginner friendly. There are issues that come from that beginner friendly situation. The throttle response is quite poor once the helicopter is at hover altitude - meaning pulling the stick back to the maximum position leads to a very gentle descent. At setting 3 out of 3 for responsiveness, the bank angle is limited too. This sadly limits the capability of an otherwise excellent package for the price. Perhaps someone will produce a CP conversion kit, or a 'pro' model will be launched.
thanks
You just can't go wrong at that price 👍
Well said
I actually just ordered this same RC helicopter. So cool how fast this thing flies. The Messerschmitt Bolkoe Blohm (MBB BO-105) is powered by 2 Allison Model 250-C20B engines rated at 420 horsepower, Same engine as the Bell 206B Jetranger.
have fun buddy
Those lil things r fun to fly in the wind
thanks
Passando aqui para prestigiar o canal e deixando aquele super like.
Thanks buddy 👍😀
Nice flight Brother 👍
Thanks 👍
Bravo pilota nel vento! Ottimi video 👽💪very good 😎
Thanks buddy 👍😀
I have 2 of them the first fry up the esc and keeping for parts the second one i use to fly early in the mornings with low or no wind its lot of fun and durable if the main motor will be Brusheless and there be switch to manual control this think it will be epic
well said
Hello,
Nice flights, a question, I have a Graupner MZ16 transmitter, can I control these helis with it?
Kind regards, Willy
No you can't
I love that chopper, 4 blades, very scale, color, and easy to fly. Thank you for making and posting this video. (You're a very skilled pilot). ¿What is the more conventional position of the throttle control lever, please? (¿Right or left?). Thank you.
Thank you very much! throttle left or right it all depends upon pilots choices and regions.
@@alishanmao Thank you for the kindness of a reply. God[Bible] Bless.
Wow she's QUICK 🚀
thats what he said
Optical flow sensors maintain altitude, not position. GPS provides position hold.
Please check your knowledge again about how optical flow sensors work and what do they do then come back to comment. Thank you.
Muito top esse modelo. Parabéns amigo... Aguardando o meu chegar do banggood
have fun buddy :)
I did pre-order mine, it's under way, love it, the scale look
have fun buddy
good review my friend,yes it would be better full manual ,and a better position hold!!
Right on
Just received my Eachine E120 RTF, read the directions,charged the batteries,installed the batteries in the transmitter,bound and lift off in my living room "Which is quite large",hoovered perfect no trim needed,only complaint is the slow stick input,you have to move the sticks quite a ways before the E120 reacts.Over all it's ok 👍👍👍,could you do a short video on how to set up the E120 to fly with my Radiomaster TX16s or Radiomaster Zorro open TX ? would be much appreciated
They are just like that. mine are sold out lol, so can't do tx16s videos
I love this thing..
have fun
8:58 those bank angles look realistic to me for a utility helicopter.
Thanks
Just bought this for $105 I’m super excited to fly this
have fun buddy
The Optical Flow is a function of the remote control, the helicopter uses the barometer. Mr. Amewi explanes in his video how it works at about 4.30 min. Its German, but bodylanguage speaks for itself. The video: Amewi AFX-105 Single Rotor Scale Helikopter Unboxing & Erklärung have fun!
will check it out
your videos are always good!, but this end of the video was amazing!,,,,🤣🤣🤣,,, great idea!
Glad you like them!
Fantastic Video! All in all this one or the esky 300?
if you like Airwolf ESKY 300V2, if you like BO105, this one. choice is yours
Fly it like you stole it!
;D
Sounds good.^^
Cheers from Berlin, Germany my friend and I gotta say they did not skimp out on the German name, it's even hard to say or remember as one.
Cool, thanks!
Verry 2 nice Mr 👍👍👍👍
Thank you kindly
Mine just arrived ❤😊
congrats
thats the low budget covid version, receiver gyro echine budget electronics. looks cool good video.
Cool, thanks
I was under the impression that altitude hold was all it had, not position hold? My neighbor just got one from my advice, even though I'd never flown one yet. He's a super newbie, and although I've been in the hobby for over 30 years, I never really got good at helis, even though I have a bunch of them! lol
it all comes with practice
I really like your videos and the way you present them. I checked out a video on learning to fly a CP helicopter and worried about the second step nose in hovering.
Nose in is the most difficult thing to do with a CP heli without stability if you have it. In my country the Uk we have a basic helicopter achievement scheme that requires the tail in hover then the hovering T leading to the figure 8. I fear a newcomer would soon crash nose in without a training aid. I learned to fly with a flybared heli
maybe the flybarless helicopters are more stable.
these are more stable and with altitude hold, position hold features, makes it easier to learn orientations. however throttle control that is one of the most important skill, you can't learn that with such features
@@alishanmao I only issue a have is nose in hovering this in my opinion should be done when you are very confident and can fly a figure 8.
I would certainly recommend a training aid to start with definitely if your helicopter doesn't have all the stability aids. Keep up those videos i love the way you present them.
@@Lonsome1223 yes for ordinary helicopters. the training gear like old school, with ping pong balls would help a lot.
I jus got this sweet copter and man I gotta tell ya it’s soooo easy yo fly I’m actually learning to do figure 8’s something I cannot do with my other cooters cuz m not a good pilot yet but with copter I’ll learn!!
have fun buddy :)
The RC Era version even takes the eshene battery. Its literally the exact same just less money.
eachine never makes any heli. they take from different companies and stick their own stickers
I can't find optical flow in the specs of this helicopter anywhere, are you sure it exists? Same as the pro version that does exist, but never mentioned in a RUclips video. the difference is in the remote; is has other sticks maybe better performance in the yaw?
mine did say it has Optical flow. but does not work properly
Good review as usual.
What's to think against E130 (I own it and it is really funny for the price)? It seems to have the same aptitudes with a scale modeling for E120 (cockpit, fairing, frame, 4 blades, ...), isn't it? E110 seems also interesting for the price but camera is quite deceptive. E200 ... I am septical for the price, but I still wait my FW200... I was and I am still so satisfied with FW450, even in V1 version.
go for FW200
@@alishanmao Excactly what I thought. I'll keep my E130 as it is not a bad chopper for the price, ideal for beginners and intermediates.
But for best practice FW450 (mine is still V1) and future FW200 are more expensive but much sure to pilot and for extend flying time with extra/better batteries, it worth the money of course even if it is not so cheaper! Thank you very much for your quick answer! I wikk wait for FW200 so much...
For FPV if necessary (not in my case as I own several Fimi and DJI products like FPV and Mavic Cine), a small FPV cam like Eachine is sufficient, I have a Eachine TX02 (TX01 and DTC03 existt also) and for the price if you have a standard mask, it will make the job, rvrn on a car.
Don't want to speak about my other products as Fimi X8 mini (a bomb for the price), DJi FPV so specific and my absoltely best DJI Mavic 3 Cine, it is not the subject, (but fliy so well) or splendid WW2 Eachine WWII warbtirds, they are amesome for the cost. + Traxxas cars fot my children, ...
You see I try to test a lot of ptroducts, not one or twoand that it..RC pilot a day, RC pilot forever -)
Thanks and see you again
Daniel
The lack of a spool up, I find scary. Prob. no brushless main for its price but its moving ok , will have to get used to it & most likely join the Fleet of scale XK's. Good peeks, amigo. TY 👍
Thank you So much. Appreciate it buddy. 👍🌹
My understanding is that it is two brushed motors, one each rotor.
Nice video. I dont think prioritized batteries are a good thing. I looks and flies good.
Yes I agree
It is cool. But you can save about $40;if you buy the rc era version called e168. Its the exact same heli my just different decals. I bought the 4c era version too
thanks for update
No prob. I noticed though. The performance,speed and control is much better on the eachine one though. The RC era one is much slower as well and harder to control in the wind.
@@dradden1556
But the Rc Era doesn't come with an optical flow.
Besides that it's the exact same model.
Greetings 😊👍🏻
Nice. Am indonesia
Thanks buddy 👍😀
Nice heli sir..support
All the best
Ordered from Aliexpress mid april. Last ship update mid may. Tried to open dispute and they say you can't do that until 7/10 2022. 3 months before you have any recourse even if it was never delivered? Won't be ordering there again.
aliexpress is nothing but a gang of cheaters and robbers. i always tell people to stay away from aliexpress.
Can you bind it to open tx radiomaster?
yes, but you need to download new protocol by updating firmware
Can you bind a radiomaster open tx 4n1 radio to this?
if you can find the protocol, yes you can
Nice review. I am waiting for mine to arrive
Have fun!
Tell me after that which helli its appropriate? i purchase xk 123 and i was hard time i sell it its fragile and very difficult. I want one heli to learn to stand in winds and durable Brushless and collective i dont want to learn 3d
Get his one: tiny.cc/nakruz
or this one
tiny.cc/g8anuz
fly it scale and be happy. 2nd one has GPS so you will have more fun with it and if you want to do 3D, it has auto 3D features, you do not need to learn anything
Love it, love the price ❤️👍🙏🇬🇧
Same here
Hallo Ali Can I bind it with a Multimodul 4 in 1 ? Which Protokoll?
I have not bound it to any 4-1. gotta check
I think it is very good cause the delivered TX is not so good. You can fly smoother with an other TX. Maybe you find that Protokoll ❤
Withmy e120. If there is just the slightest wind. Its really hard to maintain,even on #3 setting
yes these are not designed for winds
They bring this to the market? How about a Hind Mi-24?
hope so
I know this was a year ago, but the new Description says nothing about Optical Flow. Interesting says No Ailerons.
Product Description:
1, No ailerons, 4 channels, automatic stabilization system, more stable than the previos version.
no ailerons is the dumb translation of chinese to English. it means Flybar less
@@alishanmao ok, Lost in the Translation! 😂 The Pro one Heli Direct lists must be a Knockoff. No flow control. I ordered one from Banggood direct. Shipped today.
Did you actually try to do a gyro calibration since it wouldn't position hold? That's a feature it has.
gyro calibration is for when your helicopter drifts to one side and even trimming does not help. its not for position hold my friend. position hold is done with optical flow sensor which is not programmed right.
@@alishanmao Dude, it was drifting all over the place. So FIX the drift, eh? Ain't that hard.
Can it be bounded to e6 transmitter, which they sell with E200 Blackhawk? I started to learn flying better and I don’t like the stock transmitter anymore…
not sure about that buddy
fast yaw is probably for indoor flying, very quick turn around ?
flight controller and programming issue. or very much possible the el cheapo radios and their potentiometers :D how are your samples flying buddy?
dusw you are flying a mini heli outsyde, this thing has amazing performance for the price especially in heavy wind
Thank you :)
My e120 will be flying fine or hovering. Then all the sudden the props stop and it drops out of the sky. I've tried making sure the prop mechanisms are fine and batteries are full charge. What do you think could be causing it? Can you help with some advise please? I've only had it a couple weeks. It was working real good . This just started happening.
seems like ESC or battery problem
Ok. Thank you
Your right. Must be the esc. I checked all 3 batteries and connectors,. All seems to be ok.
Also . Thank you
Ali,
I have just discovered RC Helicopters due to a friend showing me his beginner copter he flys indoors, and based upon your reviews. I ordered an E120 which should arrive tomorrow. The manual doesn't make any sense with regard to recalibrating the gyro. What is the exact process for doing that?
Thanks!
when starting the heli, make sure its put on a level surface. it will initialize gyro itself
@@alishanmao Thank You !!!! :>)
Hi my friend, do you know who made this helicopter, because it's selling under the name Eachine C-120 and ERA C-186
The guy who makes and OEM for Eachine like E180, E150, E200 UH-60 blackhawk, his brother started this company and making these helis so they are doing OEM for others as well. seems like they are making truck loads of money by selling these BO105 and Sentry E110 :D
@@alishanmao Wow, You did a good reseach on this one, thanks for answer My question
I very curious if main motor is brushless or brushed
brushed i think
According to the part listing on aliexpress, it's brushed
My eachine 120 has a pronounced lean to the right during hover and I noticed until Ben is bent a little to the left with the rear motor could this be the problem ?
Thanks Henry
this helis do have this natural stance.
you need take off the propellers c128 put on this see how fast it gos
Hi my friend, do you know how I can take the stickers from the helicopter? Thank You, Best regards to you
Spray paint or hand paint
@@alishanmao thanks for share your opinión
@@RadianXL2023 welcome
Is Eashine a Wltoys re-brand?
This is not coming from WLToys. :) story is different. can't share it now
Goob job
Thanks buddy 👍😀
Kan i setup the Messerschmitt Bölkow Blohm B0-105 Mini RC Helicopter to a radiomaster TX16? Kind regards, Willy
sweet, which protocol to use?
Thanks for the quick reply,. That's the question, i'ts the BO 105 from modster.@@alishanmao
@@freewilly1002 we are all trying to find the protocol still LOL
@@alishanmao These things are available in a whole raft of re-brands of the OEM Yu Xiang BO105. Pascal has the Protocol decoded now. (E129/C186) You will need Multi Firmware Version v1.3.3.13 and better. That suits the XK K127 as well.
@@theoztreecrasher2647 😃
Nice Heli but need a more lighter colour like Orange german (Katastrophenschutz) or Yellow (ADAC) German automobile club.Heli is nice for watching how it fly scale and nice to make videos where it flys.This Heli was selled under 6 different brands. Eachine,Amewi,FM, and on
you can paint it yourself
@@alishanmao I buy under FM brand in White Red, nice colour .First Mini Heli i own that can withstand a windy day . Under the front underside there is a hole (under the sticker) to build in a Led for night flying.
Also comes in orange or green black camo
@@ka4172 that's where this heli has the optical flow sensor, missing om many others
Is this a fixed pitch?
blades change pitch but only positive. so its collective pitch but in a sense works like fixed pitch
I love the black hawk but its 4 times the price, is it worth that much more?
the performance of that helicopter, flight times and its power to do 3D, its worth it. besides the scaled shell is also very detailed. i know price is high and its due to covid19 that has screwed the businesses and supply chains and everything is getting more and more expensive.
nice heli. Will you also be able to tie it with the TX16s?
as soon as i find the protocol
@@alishanmao I hope you find it. Much luck.
toppp 🙌🙌🙌🙌🙌🙌👍👍👍👍👍👍
Thanks buddy 👍😀
need some of your help with edgetx helicopter model setting , this newer version is not so east as open tx .
never touched EdgeTx. I am still happy with my old RadioMaster TX16S with opentx. same reason. I do not like new things and new surprises. If something is working for me right, i stay with it until i have no way to stay with it and I have to move. Check with edgetx groups online please. thank you
i should have stayed with opentx , thanks anyway , next is goosky rc heli.
i understand,thanks.
Is that 0615 tail motor?
not too sure bout that
That helicopter has a brushed motor, that is why it under power and can’t handle the wind
tell me about it
@@alishanmao you can also tell by the motor sound
does the optical flow work great?
Works ok, but not good
@@alishanmao Hallo, du musst vor dem Flug den Sensor kalibrieren. Beide Steuerknüppel gleichzeitig kurz in die untere linke Ecke drücken.
its¨me, again, how many dots of battery I need to leave in the battery i have to leave on , to an long time storage, can you help
2
@@alishanmao once again thanks
what is the motor used for this heli?
brushed
The Blade Red Bull B-105 is still better cause it didnt have that stupid direct drive tail motor.. I feel thats cutting corners. this heli needs a drive shafts for tail rotor rotation.. Like the real thing!!
its cheaper to make motor driven tail now i believe so these manufacturers are moving towards it
Does it have altitude hold?
yes
Hi, it's me again, do you know the scale, to get stickers from the Armada de México, thanks My friend
Not that I know of
Scale is 1:47 or 1:48. Standard plastic model aircraft scale.
@@timothycampbell495 thanks for share your opinión, Best regards
you should fly one into some froot like a wattermellion
maybe next time :)
Fruit
Hi Ali! Thanks very much indeed for the awesome review of this heli. I could realize there is a RC era C186 wich seems quite similar to the e120.
Are they made by different manufacturers or they are like the e200 and f09 U-60 which are both made by YUXIANG?
same manufacturer, same thing just different names, colors and stickers slapped on
@@alishanmao the C186 seems to don't have the optical flow sensor
This heli was not meant to be flown in windy conditions.It is too small and too light.
yes but it flew well
♥️
Thanks buddy 👍😀
I bought one and its suvk, once it take off it went back ward, cannt even fly never buy cheap copters again😢😢😢😢😢
you can do the gyro calibration buddy. turn on radio and helicopter, throttle up and down. now do not take off but pull both sticks down and left and hold for 2 seconds. heli lights will blink and once stop blinking. you can take off, and it will hold solid hover
I want to add stickers from Mexican Armada
paint it
@@alishanmao I also think, that's the Best way to do it again thanks for share your opinión Best regards
Salut ça coûte combien 🤝
Links in description
@@alishanmao j'ai pas compris